Packaging & Shipping
1. Packed in individual cartons.
2. Cartons will be wrapped up on the pallet with wraping film.
3. Special design and customization are acceptable as required.
Standard stock: 2 working days; Special production: 15 days
High Pressure Regenerative Ring Vortex Blower
1. Adopt SKF & NSK & TPI bearing. 2. Use ADC12 aluminum alloy material.(same to BMW's wheel hubs) 3. Random installation( vertical or horizontal) 4. Insulation class: F, Protection class: IP54 5. 100% oil free air delivery ( Impeller connected to the motor directly, without any oil lubricating) 6. No routine maintenance (whithout wheel gear and belt,don't need to do maintenance towards those parts) 7. Quiet operation, low noise(adopt low noise motor, meanwhile inlay muffler is available if lower noise required) 8.Variable output control(pressure or vacuum) 9.Pulsation-free compression(use quakeproof footstand) 10.Long term durability(24H running) 11.Strictly tested before leaving the factory 12.CE, CCC, RoHS, ISO9001 certified.
Warranty of high pressure blower
1 year since the high pressure blower leave factory
Usage and maintence 1. high pressure blower must be installed in a plane surface and keep ventilation,opening and clean 2.Rotating direction of blower must be same as arrow in the fan cowl 3.After 20000 hours of operation, the bearings should be recharged with fresh grease or replace with new one if necessary. 4.Filter should be cleaned regularly 5.Replacing bearing should be operated by professional staff